description

S1-Series Vertical Centrifugal Sand Separators are constructed from carbon steel and commonly used when removing suspended solids or organic materials down to 80 microns and rated up-to 150 PSI. Everfilt's industry exclusive 'E-Flow™' design accelerates incoming fluid for better solids separation and maximum performance. Whether you're adding the S1-Series Sand Separator as a pre-filter to an existing filter system or a new project, rest assured the S1-Series will provide exceptional results, while prolonging the life of your system from premature wear caused by excessive sand or silt present. The S1-Series Sand Separator is designed as a vertical, agricultural sand separator with multiple sizing options. Our centrifugal sand separators are designed with minimal moving components, which ensures low-maintenance requirements and reduced operational costs. Exterior of sand separator comes in an industrial grade primer and two-part epoxy gloss finish, with UV resistant additive to prolong life and appearance of your system.

features

height: 10v [21.5"], 20v [21.5"], 30v [21.5"], 40v [30.5"], 50v [30.5"], 60V [30.5"], 70V [38"], 80v [44"], 90v [48"], 100v [49"]
PURGE DIA: 10v [1" FPT], 20v [1" FPT], 30v [1" FPT], 40v [1" FPT], 50v [1" FPT], 60V [1" FPT], 70V [2" fpt], 80v ["2 fpt], 90v [2" fpt], 100v [2" fpt]


psi: 150 max
gpm: 10v [3-6], 20v [4-10], 30v [9-20], 40v [18-36], 50v [26-52], 60v [38-79], 70v [63-120], 80v [100-180], 90v [125-260], 100v [190-345]
sludge capacity: 10v [0.06 GAL], 20v [0.09 gal], 30v [0.12 gal], 40v [0.23 gal], 50v [0.33 gal], 60v [0.40 gal], 70v [0.73 gal], 80v [1.12 gal], 90v [1.54 gal], 100v [2.14 gal]

COATINGS: 2-part epoxy exterior / uv-resist