description

HP-SM-Series sand media filters are designed for applications up to 250 PSI and come equipped with 3-leg construction per tank. Systems are fabricated from 0.25" thick carbon steel - 100% welded for added strength and safety. Single grooved media fill ports (sizes dependent on tank diameter) with carbon steel lid, grooved couplings/gaskets, and single media drain port. Each HP-SM-Series sand media filter comes standard with 304SS welded wedge wire underdrains (NO PVC or false bottom design), for years of continued use. Exterior of tank comes in an in an industrial grade primer and two-part epoxy gloss finish, with UV-resistant additive to prolong life and appearance of your system. Interior of tank comes with brushed-on industrial grade 233H epoxy coating for superior protection.

features

DIAmeter: 12", 18", 24", 30", 36", 48", 54"
SIDE SHELL height: 8"

psi: 250 max [54" - 12"] 
gpm: 15 MIN - 5000+ MAX
ft2: 0.78 [12"], 1.76 [18"], 3.14 [24"], 4.90 [30"], 7.06 [36"],
12.56 [48"], 15.89 [54"]

media: silica sand / gravel
COATINGS: epoxy INTERIOR / 2-part epoxy exterior / uv-resist
underdrain: welded 304ss wedge wire