top of page

Industrial Wastewater Treatment Systems


STAK-Series Screen Filter™

Everfilt® engineers have taken proven stainless steel wedge wire screen filter components and applied them to a unique “stacked” design, that offers the best of all worlds.


  • Fast Automatic Backwash ( 15 seconds / cartridge )

  • Low Pressure Backwash ( 25 PSI )

  • 600 - 1400 GPM per unit @ 200 Mesh

  • 125 PSI Rated 304 Stainless Steel

  • Compact, Factory Assembled & Skid-Mounted


  • Municipal Wastewater

  • Industrial Process Water - Initial Screen

  • Irrigation

  • Surface Water ( Canal, River, Lake ) Initial Screen & much more

SMS-Series Screen Filters

Everfilt® has incorporated the unique configuration of high-strength stainless steel wedge wire to remove suspended organic and inorganic solids. Flow rates range from: 25 GPM to 2250 GPM.

(Auto Backflush ( Reverse Flow ), Manual Backflush ( Reverse Flow ), Manual Clean


  • Stainless Steel Wedge Wire Cartridge

  • Operation Uniformity / No Blind Spots

  • Mesh Uniformity / No Screen Deformation

  • Stainless Steel Housing

  • Wide Range of Mesh Sizes & much more


  • Municipal Wastewater

  • Industrial Process Water - Initial Screen

  • Irrigation

  • Surface Water ( Canal, River, Lake ) Initial Screen

STS-Series "Turbo" Screen Filters

The Everfilt® patented TURBO SCREEN™ offers a superior method for flushing a screen filter. These units use stainless steel wedge wire screens and are ideally suited for low cost applications, where a flushable screen is needed. Standard sizes range from: 100 GPM to over 3600 GPM. Automatic or manual cleaning in 3 - 5 seconds. Multiple cartridges for high flow rates.


  • Patented "Turbulator" Technology

  • Continuous Cleaning Action

  • All-Welded, Single Unit Stainless Steel Constructed Wedge Wire

  • Corrosion Resistant Stainless Steel Housing

  • Flanged Connections


  • Industrial Process Water - Initial Screen

  • Irrigation & Equipment Protection & much more

CTS-Series Cooling Tower Filter Systems

The Everfilt® CTS-Series Cooling Tower Filter System is a practical and efficient means to reduce cooling tower contamination. Airborne dirt, grit, sand and microorganisms, plus water and sunlight combine to make an environment ideal for the growth of unwanted algae and slime. An Everfilt CTS-Series filter will significantly reduce chemical treatment costs and downtime due to system fouling and save money in operating efficiency and cleanup labor.


  • Vertical Tank with Symmetrical Water Distribution & Deep Sand Bed for Maximum Filtration Efficiency

  • High-Strength Stainless Steel Underdrain ( no plastic ) & much more


  • Industrial Process Water

  • Industrial Wastewater & much more

Media & Multi-Media Filtration Systems

A full line of media and multi-media filters for the removal of suspended solids and turbidity, plus many dissolved solvents, soaps, chemicals and other substances found in industrial wastewater or liquids and in groundwater supplies. Capacities from 1 GPM to 10,000 GPM. Solids removal to 2 microns (0.2 microns when packaged with cartridge filters). Skid mounting, chemical injection and disinfection available in packaged systems.


  • Automatic, Self-Cleaning

  • All Steel Construction ( No Plastic )

  • Epoxy-Coated Carbon Steel or Stainless Steel

  • No Moving Parts & 3-Way Hydraulic ( or Pneumatic ) Backwash Valves

  • Solid-State Electronics Controls & Customized Designs


  • Industrial Process Water

  • Industrial Wastewater & Wastewater Recycling

  • Potable Water & Irrigation Water

  • Groundwater Remediation & much more

To discuss more information regarding Everfilt® Water Filtration Systems, talk with an Everfilt® Applications Engineer: 1.800.360.8380 /

bottom of page