 |
| Each activated carbon system is engineered to the client's specific goals and data on water quality |
Everfilt activated carbon water filtration systems are skid mounted, factory assembled,
wired, and hydro-tested. Carbon adsorbers are delivered ready for installation.
Gauges, meters and valves are included for our activated carbon adsorbers. Everfilt
also manufacturers a wide range of deionizers, demineralizers, and dealkalizers
with capacities from 25 GPM to over 10 MGD.
Where a carbon adsorber size requires on-site installation, the entire system is pre-assembled and tested at the factory to assure proper fit-up, performance and carbon adsorption. The carbon adsorber filter system is then shipped in pre-assembled modules to reduce the time required for on-site installation.
Over 50 pre-engineered activated carbon water filtration systems make it possible to choose the most cost effective size for any application. You're not limited to a fixed number of standard filter systems. If your application requires special sizing and/or features, our engineers will design a custom activated carbon water filtration system to your specifications.
Backwashing valves with automatic or manual operation can be included to extend carbon life. A wide variety of valve and actuator types can be specified for your carbon adsorber system. Quick connect couplings are available to speed carbon change-outs.
Detention time and quantity of carbon are also tailored to your specific requirements. Sizing is determined by: the flow to be treated, the contaminant(s) to be removed, their concentration, and the desired length of run time between carbon change-outs. Everfilt's applications engineers discuss your requirements with you and recommend the most effective configuration. Call us at 1-800-360-8380 to consult with an engineer today!
Multi-media pre-filters and disinfection modules are available for integration with your carbon system.
|
